Nexelec GUARD+ Smoke alarm
£59.00
Smoke detector
- Temperature & Humidity sensors
- 1 replaceable battery, 5-year battery life
Connected
Remote maintenance without entering the home
Interconnection
Up to 25 interconnected sensors and accessories
Temperature / Humidity
Measures home environment parameters
Monitors temperature and humidity on a daily basis
GUARD+ combines the essential functions of a smoke detector with the advantages of a temperature and humidity sensor. The device provides effective monitoring of ambient conditions in the home, while guiding you towards energy-saving measures and improved indoor air quality. To avoid any risk of erroneous measurements, the detector is approved for wall mounting, at a distance of 30 to 60 cm below the ceiling.
- Very low power consumption for the detector and on-board electronics
- Includes 1 replaceable CR123 lithium battery
Part Number
X860LS Choose Quantity
Product Details
Reduce false alarms
Electronic self-compensation for dust in the detection chamber
Air 360°
Exclusive detection technology. Simplifies maintenance by residents
Insect barrier
Pest protection grid integrated into the detector
Powerful audible alarm
85 dB at 3 meters to quickly alert occupants
The connected detector that saves you time!
GUARD+ is specially designed to meet the needs of lessors and building maintenance specialists. The detector is available with different radio protocol options.
Remote monitoring
When a fire breaks out, the product triggers an alarm to alert the occupant. Our connected detector is initially programmed not to transmit fire alarms. If you wish to react to these warnings or carry out checks, you can adjust the device's settings or use the services of an authorized remote monitoring company.
Remote maintenance
Be alerted in real time to detector faults, low batteries or other critical parameters. Simplify the management of your thousands of detectors, while ensuring the safety of your residents.
Regulatory compliance
Sensor calibration certificate issued by a COFRAC-accredited independant metrology laboratory
Network of interconnected detectors
When a detector detects the start of a fire, all interconnected detectors in the network are triggered simultaneously.
Compatible with REMOTE
Remote control of ceiling-mounted detectors. A single remote control can operate detectors in all homes
Compatible with ALERT deaf and hard-of-hearing kit
Alarm with strobe flash and vibrating cushion. Relays alerts from detectors up to 100 meters in open field
Universal** mounting base
Simplifies replacement of other brands of detectors without drilling new mounting holes
Compact mounting base
Only 3 cm in diameter to avoid damaging the installation surface
Approved** 3M adhesive fastener
CE-certified mounting device for installing the detector without screws or plugs. No need to drill through walls where asbestos, pipes or cables are present
Anti-tear detection
Triggers an alert message in the application if the detector is removed from its mounting base
Rip-off protection
Lockable mounting base to reduce the risk of detector removal in rental accommodation
Control your detector with your fingertips!
Need to test or stop your detector’s alarm? It’s easy and simple to do, thanks to the large touch-sensitive button on the front of the product
Silence function
Stops the alarm and/or puts the detector on standby for 10 minutes without removing it from its base.
8-hour beep delay
Temporarily silences fault beeps until detector is replaced
Signal light
Discreet LED indicator in standby mode, powerful in alarm mode
