X1 Sensing Camera
X1 Sensing Camera
X1 Sensing Camera
X1 Sensing Camera
X1 Sensing Camera

X1 Sensing Camera

£70.00 - £116.00
The Milesight X1 Sensing Camera captures 1080p stills of equipment that has no data output, turning analogue dials and gauges into readable records. Available in a standard Wi-Fi version for buildings with existing coverage, or a Wi-Fi HaLow version for basements and plant rooms where 2.4 GHz will not reach.
Type
Choose Quantity
+ Add to Cart
Product Details

Plenty of working plant will never be replaced simply because it lacks a digital output. Instead of swapping out a functioning gauge, the X1 photographs it and lets software do the reading, which turns a clipboard round into an automated one without touching the asset itself.

Two lens options suit the space available. The 1020 lens covers a 77 degree field from 10 to 20 cm away, while the 0510 super close lens opens to 120 degrees at 5 to 10 cm for tight enclosures. Several instruments can sit in a single frame, so one device often covers a whole panel rather than one dial apiece. Capture runs at a set interval, at scheduled times, on a signal through the alarm input, or on a press of the external button when an engineer wants a record on the spot. Forty JPEGs are buffered onboard if the connection drops, and images publish over MQTT to the Milesight AIoT Sensing Platform or to a third party system via HTTP, open APIs or CGI. Milesight will also train a recognition model against your own scenario and sample data where the standard algorithms do not fit.

Choosing between the versions comes down to the building. The SC541 uses ordinary 802.11 b/g/n on 2.4 GHz with an internal antenna, joining the network already in place, and runs around two years on two AA cells. The SC541-HL transmits on 863.5 to 867.5 MHz instead, where the longer wavelength passes through concrete and steelwork that stops conventional Wi-Fi, and lasts up to three years on the supplied lithium cells. It uses an external SMB antenna and pairs with an HL31 gateway, which is a required part of that deployment rather than an option, since its 2.4 GHz radio handles commissioning only.

Both share a 62 mm square housing weighing well under 100 grams, a Type-C power input as an alternative to batteries, and a standard 1/4-20 UNC camera thread for mounting. Rated IP30 across 0 to 50°C, they are indoor devices.

Deployed in meter and plant rooms, utility cupboards, district heating substations, water treatment buildings and industrial control panels.

Items have been added to cart.
One or more items could not be added to cart due to certain restrictions.
Added to cart
- There was an error adding to cart. Please try again.
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.